Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Climate Control Bulbs on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: A/C controls

See other generations:
Video tutorial

Use the radio removal tools by inserting them into the four holes at the corners of the radio and pull it out, then disconnect the rear cables. Unscrew the seven T25 Torx screws that are now accessible and also remove the radio housing (there is a connector to disconnect here as well).

Remove the lower flap of the central panel by simply pulling it by hand, then unscrew the other two Torx screws now accessible. Release the climate control block and turn it to access the two bulbs.

At this point, it will be a breeze to remove them and insert the new ones you have purchased. Cheers!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Replacing the Heating Control Bulbs on a Fiat Grande Punto
Replacing the Heating Control Bulbs on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will learn how to replace the bulbs for the heating control illumination on a Fiat Grande Punto. First, remove the car radio using…
Removing the Air Vent Knobs on a Fiat Punto
Removing the Air Vent Knobs on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Let's look at removing the air vent knobs on a Fiat Punto to replace the bulbs. Unscrew the screws located at the bottom of the air vent knobs, prepa…
How to Replace the Climate Control Bulbs on a Fiat Punto
How to Replace the Climate Control Bulbs on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Here are the instructions to remove and replace the climate control bulbs on a Fiat Punto. First, get into the vehicle and start by removing the plas…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos