Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Micro Switch on the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Checks and maintenance

To replace the boot micro switch on the Fiat Bravo, remove the rear hatch panel by unscrewing the two Torx screws in the indicated position. Using a 10mm socket, loosen the bolts securing the lock, which must be extracted after disconnecting the connector. Open the lock by removing the plastic part and detach the old micro switch from the board. To fit the new micro switch, soldering will be required. At this point, you can reinsert the board, close the lock, and refit it.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Replace the Antenna and Its Base on the Fiat Bravo
How to Replace the Antenna and Its Base on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this guide, you will find the instructions to remove and replace the antenna and its base on the Fiat Bravo. First, open the rear hatch of the boo…
How to Dismantle the Rear Light of the Fiat Bravo 2
How to Dismantle the Rear Light of the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos