Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the LPG filter on Fiat Punto Evo 1.4

Model: Fiat Punto 199, MK 3, Punto EVO, Grandepunto - Years 2005-2018

In today's video tutorial we will see the instructions to remove and replace the LPG (gas) filter on the Fiat Punto Evo, with 1.4 engine. First we open the bonnet of our car and start by removing the three fixing screws of the gas filter, using a Phillips wrench or a socket wrench; after which we remove the cover and extract the old filter, replacing it with the new one (of the right type). At this point we insert the new filter in the correct direction and reassemble everything, correctly fixing the lid, following the video tutorial until the end!

Posted on 25 August 2021 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) Let's see how to remove the LPG filter present on a Fiat Punto Evo. Open the luggage compartment door and close the LPG valve (where the LPG cylinder…
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In today's video we will see how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo, following these simple steps. First we o…
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In this video tutorial we will see how to remove and replace the diesel filter of the Fiat Grande Punto 1.3 Multijet, but also of the Punto Evo. Firs…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the power steering fluid located on the Fiat Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos