Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble and Open the Gearbox on a Fiat Grande Punto 1.2 - 1.4

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Transmission

In today's tutorial video, we will see how to disassemble and open the gearbox of the Fiat Grande Punto 1.2 or 1.4, as well as the Punto Evo and Bravo. To open the gearbox, it is necessary to unscrew all the fastening screws using a socket wrench; then unscrew the screws of the front half-shaft bearing, so that it can be replaced later. Once all the screws are removed, tap the sides of the casing to disconnect and open the gearbox into two parts, as illustrated in the video; separate the part of the engagement from the gears, following the video until the end!

Updated on 21 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Gearbox from the Fiat Grande Punto
Removing the Gearbox from the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides instructions for removing the dual logic gearbox from the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle wi…
How to Remove the Gearbox and Clutch of the Fiat Grande Punto 1.2
How to Remove the Gearbox and Clutch of the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see the main steps to remove the gearbox and clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First…
Changing the Gearbox Oil in a Fiat Grande Punto
Changing the Gearbox Oil in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Changing the transmission oil should be done at regular intervals to ensure the proper functioning of the gearbox. Here’s how to change it on a Fiat …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos