Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir Cap on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel cap

See other generations:
Video tutorial

Before you can start, open the front bonnet of your Fiat 500. The coolant reservoir cap is located on the top of the reservoir, which in turn is situated in the bottom left corner of the engine bay. Start by grasping the cap in question. Then, rotate it counter-clockwise.

By doing this, you will unscrew it from the reservoir thread. Once you have completely unscrewed it, you can remove the cap, completing the disassembly.

To fit the new cap, simply screw it in where the old cap was located, and you will have completed the replacement.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Top Up Coolant on a Fiat 500?
How to Top Up Coolant on a Fiat 500?
Fiat 500 (2007-2022 / 312) To top up the coolant, unlock the bonnet by pulling the lever located under the steering column. Once the bonnet is open, locate the reservoir that c…
Top Up Coolant on Fiat 500
Top Up Coolant on Fiat 500
Fiat 500 (2007-2024 / 312) Perform maintenance on the levels in a Fiat 500, here’s how to top up the coolant. Pull the plastic lever located at the bottom left of the dashboard…
How to Top Up the Coolant in a Fiat 500
How to Top Up the Coolant in a Fiat 500
Fiat 500 (2007-2024 / 312) Follow these steps to top up the coolant in a Fiat 500 and save on labour costs. First: pull the plastic lever located at the bottom left of the dash…

    Frequently Asked Questions

    • 500 2007-2024 - How to open the fuel cap on Fiat 500? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos