Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Seat Back Release Cord on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

In today's video, you will find instructions on how to disassemble and replace the release cord for the seat back on a Fiat Grande Punto, as well as on other models from the manufacturer. First, remove the side panel of the seat along with the handle for reclining the backrest; then, remove the metal cover and disconnect the cord at the bottom to replace it with the new one. In this case, the operation was simpler as access to the seat frame (without the padding) was possible, facilitating the replacement.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair the front seat release mechanism of the Fiat Grande Punto
How to repair the front seat release mechanism of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below we will see the instructions that will allow us to repair the release mechanism of the backrest of the front seat of the Fiat Grande Punto. Fir…
Removing the Rear Seats from Your Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Are you planning to remove the rear seats from your Fiat Grande Punto? This video explains how to do it. After removing the rear seat base, use a soc…
Replacing the Battery of the Fiat Grande Punto
Replacing the Battery of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's procedure will show you how to remove and replace the battery of the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet of t…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos