Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Multipla?

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

Video tutorial

To reset the Service light on a Fiat Multipla, turn on the instrument panel and press the button located under the rev counter, corresponding to the 'MODE' label. This should be held down until the 'Service' message and the mileage until the next service appear.

By pressing the MODE button again and navigating the menu with the buttons on the left of the display, you will reach the 'After' screen and the mileage until the service. By holding down both buttons on the left of the screen until an audible signal is activated, you will be able to reset the light.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Fiat Multipla
How to Reset the "Service" Light on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before you can start, sit in the driver's seat of your Fiat Multipla and activate the instrument panel. Begin by pressing the lower button located in…
How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
Where is the OBD port of the Fiat Multipla located?
Where is the OBD port of the Fiat Multipla located?
Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port of the vehicle, all you have to do is carefully read the following guide and follow the st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos