Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Service warning light

In this guide, you will learn how to reset the service light for the regular oil change maintenance on the Fiat 500 312 by following these simple steps. First, get in the vehicle and turn on the ignition; then press the accelerator pedal three times and turn off the ignition, as shown in the video. Now turn the ignition back on and wait a few seconds for the service light to reset correctly; repeat this operation whenever you need to reset the service intervals!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2021 / 312) Before starting, sit in the driver's seat of your Fiat 500. Turn the key in the ignition to the first position to activate the instrument cluster. Ne…
Fiat 500 (2007-2024 / 312) Let's see how to reset the oil maintenance service indicator on a Fiat 500. Enter the vehicle, turn on the ignition, and check if the warning light i…
Fiat 500 (2014-2022 / 500 X) After performing a service or oil change on the vehicle, it is necessary to reset the oil change service light. To reset the service notification on …

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos