Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Windshield wipers

Lift the wipers off the windscreen and unclip the blades from the arms as clearly shown in the video. To do this, once the wiper is lifted, open the attachment and push the blade downwards, then pull it out from the hook. To fit the new blade, simply reverse the process: insert the blade into the arm and clip it into the hook, then close the blade attachment. The procedure is the same for both front wipers. To unclip the rear blade, you will need a flat screwdriver. Good luck!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Windscreen Wiper Motor from a Fiat Panda
How to Remove the Front Windscreen Wiper Motor from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Start by opening the bonnet of your Fiat Panda. Then, remove the front wipers by unscrewing their mounting bolts. Once done, unscrew the screws and b…
How to Replace the Wiper Blades on a Fiat Panda?
How to Replace the Wiper Blades on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Replacing the wiper blades on a Fiat Panda is a very simple and quick task. First, switch off the vehicle and position the wipers in the rest positio…
Removing the wiper motor and arm on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, you will see how to remove and replace the arm and motor of the front wipers on a second-generation Fiat Panda. First, open and lift t…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos