Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the exterior rearview mirror on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Outside rearview mirror
Operation: How do you replace the exterior rearview mirror on the Fiat 500?

To be able to replace the exterior rear-view mirror of the Fiat 500, remove the plastic cover from the lower part of the mirror, using a screwdriver to act as a lever. Once the cover has been removed, it will be necessary to unhook the electrical connector that will now be visible and loosen the bolts that secure the mirror to the door. Once the connector and bolts have been released, the old mirror can be removed and replaced with a new spare part. The new mirror must be connected to its connector and fixed with the previously removed bolts.


Posted on 1 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - How much does it cost to replace the exterior rearview mirror on the Fiat 500X? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side mirror on my Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side rearview mirror on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos