Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Disassembly of the exterior rear-view mirror of the Fiat 500 L

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Outside rearview mirror
Operation: Disassembly of the exterior rear-view mirror of the Fiat 500 L

Let's see the instructions in this guide that will allow us to disassemble and replace the exterior rearview mirror of the Fiat 500 L, following these simple steps. First we open the front door and start by disassembling and removing the door panel; to do this, unscrew all the fixing screws of the same, disconnecting the electrical connector of the push-button panel and the cable of the handle. At this point we unscrew the fixing screws of the external rearview mirror, disconnecting the electrical connector of the adjustment; let's remove it from the outside and replace it with the new one!


Posted on 19 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - How much does it cost to replace the exterior rearview mirror on the Fiat 500X? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side mirror on my Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side rearview mirror on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos