Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the outside rearview mirror on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Outside rearview mirror
Operation: How to remove the outside rearview mirror on Fiat 500

Do we want to replace the damaged exterior mirror? Let's see the disassembly of the mirror on Fiat 500. Remove the plastic covering placed under the mirror, unscrew the mirror clamping screws with a screwdriver (placed above the plastic base), remove the mirror power supply clamp. We remove the mirror with the power cables from the car door. We fix the mirror with the power cables and the tightening screws placed on the plastic that is fixed on the sheet metal of the door. At the end of the assembly we can adjust the mirror mirror.


Posted on 21 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - How much does it cost to replace the exterior rearview mirror on the Fiat 500X? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side mirror on my Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side rearview mirror on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos