Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the external rearview mirror of the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Side mirror

The following steps will allow us to disassemble and replace the external rearview mirror of the Fiat 500X. First, we open the front driver's side door and start by removing the window switch panel, levering it on the sides; then we disconnect the two electrical connectors of the external rearview mirror, as shown in the video. At this point, we remove the plastic cap of the mirror and unscrew the two screws underneath; then we slide out the mirror from the outside, replacing it with the new one and making the necessary electrical connections.

Posted on 9 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Fiat 500X
How to disassemble the external rearview mirror of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In a few simple steps, we will see the process that will allow us to disassemble and replace the external rearview mirror of the Fiat 500X. First, we…
How to Replace the External Wing Mirror on the Fiat 500X
How to Replace the External Wing Mirror on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) To replace the external wing mirror on the Fiat 500X, remove the plastic cover located just below the mirror and loosen the two screws underneath. Th…
How to replace the external rearview mirror of the Fiat 500
How to replace the external rearview mirror of the Fiat 500
Fiat 500 (2007-2024 / 312) In the following guide dedicated to all of you who own the new Fiat 500, we will discover how to correctly replace the external rearview mirror. Firs…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos