Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the exterior rearview mirror on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Outside rearview mirror
Operation: How do you replace the exterior rearview mirror on the Fiat 500?

In order to replace the exterior rear-view mirror of the Fiat 500, you have to remove the external cover of the mirror, which covers its connection support to the door. Once the cover has been removed, it will be possible to go and unscrew the screws underneath, so that the external rearview mirror can be completely removed from the door. In this way it will also be possible to disconnect the connector, so that a new mirror can be inserted in its seat: this must be fixed with the corresponding screws and covered with the appropriate plastic covering.


Posted on 23 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - How much does it cost to replace the exterior rearview mirror on the Fiat 500X? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side mirror on my Fiat 500? Read Answer
    • 500 2007-2023 - How much does it cost to replace the side rearview mirror on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos