Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Wheel from the Fiat Fiorino?

Model: Fiat Fiorino MK 2 - Years 1988-2014
Part: Wheel

To remove the spare wheel from the Fiat Fiorino, open the boot lid. Using a socket spanner, loosen the bolt located just above the bumper on the left side. As you loosen this bolt, the spare wheel will begin to lower; when the wheel is on the ground, it can be used. Remove the wheel to be replaced by loosening the appropriate bolts and insert the spare wheel in place of the previously removed wheel. After installation, secure the spare wheel using the appropriate bolts removed earlier.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Wheel on the Fiat Fiorino
How to Remove the Spare Wheel on the Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) In this tutorial, you will see how to remove the spare wheel from the floor so that it can be mounted in place of the punctured one on the second ser…
How do you replace the water pump on a Fiat Fiorino?
How do you replace the water pump on a Fiat Fiorino?
Fiat Fiorino (2007-2025 / MK 3) To replace the water pump on the Fiat Fiorino, you will need to lift the vehicle and then loosen the bolts that secure the front right wheel to the c…
How to Unlock the Radio in the Fiat Fiorino
How to Unlock the Radio in the Fiat Fiorino
Fiat Fiorino (2007-2025 / MK 3) Today, I will explain how to unlock the radio in the Fiat Fiorino after replacing the battery. To unlock the radio, you need to know the unlock code,…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos