Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Wheel in a Fiat Fiorino

Model: Fiat Fiorino MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Steering wheel

See other generations:
Video tutorial

Before you begin, sit in the driver's seat of your Fiat Fiorino. Start by unscrewing and removing the screws located at the back of the steering wheel.

This will free the airbag, which you can then extract and subsequently disconnect the rear connector. Once you have disconnected the rear electrical connector, you can remove the airbag.

After this, you will have exposed the central fixing bolt of the steering wheel, which you also need to unscrew and remove. Once you have completed this step, you can remove the steering wheel, and you will have finished the disassembly.

To install the new steering wheel, simply reverse these steps, and the replacement will be complete.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Fiat Fiorino
How to Remove the Steering Wheel from a Fiat Fiorino
Fiat Fiorino (2007-2026 / MK 3) Before you can start, sit in the driver's seat of your Fiat Fiorino. Begin by unscrewing and removing the screws located at the back of the steering …
How to deactivate the passenger airbag of the Fiat Fiorino?
How to deactivate the passenger airbag of the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) To deactivate the passenger airbag of the Fiat Fiorino, turn on the instrument panel by turning the key in the ignition switch. Once the panel is on,…
How do you set the clock on the Fiat Fiorino?
How do you set the clock on the Fiat Fiorino?
Fiat Fiorino (2007-2026 / MK 3) To adjust the clock of the Fiat Fiorino, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: this way…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos