Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Cabin air filter

To replace the cabin air filter, open the glove compartment. You will then face the two side walls that delimit the compartment itself; apply slight pressure inward on the left wall and then the right to unlock the drawer. Fully open the compartment and you will see a plastic panel that conceals the filter to be replaced. To remove it, simply apply slight pressure first on the left clip and then repeat the operation on the right clip. After removing the cover, you will find the filter to be replaced; extract it and replace it with the new one. For optimal performance, it is recommended to repeat this operation every 15,000 miles or annually.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Pollen Filter on the Fiat Freemont
How to Replace the Cabin Pollen Filter on the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Replacing the cabin pollen filter when necessary is very important as it helps maintain an optimal level of air quality inside the car, especially wh…
How to Replace the Air Filter on Fiat Freemont
How to Replace the Air Filter on Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Remove the engine air filter on a Fiat Freemont: open the car door, pull up the engine compartment release lever located at the bottom left of the da…
Replacing Automatic Gearbox Oil on the Fiat Freemont
Replacing Automatic Gearbox Oil on the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Open the bonnet and locate the box containing the air filter; to access the automatic gearbox to check and possibly replace the oil level, you need t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos