Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : How to replace the cabin filter in a Fiat Freemont

Fiat Freemont - Video tutorial

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Cabin air filter
Operation: How to replace the cabin filter in a Fiat Freemont

In this video tutorial we can see how it is possible to replace the cabin filter in a Fiat Freemont, following a few simple steps: the first thing to do is to buy an original and quality pollen filter from an authorized dealer; next step we have to get in the car, turn off the car and pull the handbrake. The pollen filter in this car can be found inside the car, on the passenger side, behind the glove box; first we go to open the drawer and remove all the material inside, then to unlock the compartment there are two tabs, one on the left and one on the right, then we go to press from the outside towards the inside and pull down the dashboard. Now we are going to remove the filter cover (press the side tabs) and then we have to extract the old filter from its seat; insert the new filter, following the indications of the arrows according to the air flow.


Posted on 13 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Freemont 2011-2016 - Where is the Fiat Freemont cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos