Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Tailgate Switch on the Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Push button

In this video tutorial, we will see how to remove and replace the tailgate switch of the Fiat 500 in simple steps. First, open the tailgate and start by removing the inner trim, taking out all the plastic clips; then disconnect the electrical connector of the tailgate lock and unscrew the screws of the lock to remove it, as shown in the video. At this point, remove and replace the tailgate opening button; finally, reassemble everything by applying the reverse procedure!

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wiring of the Fiat 500's tailgate
How to replace the wiring of the Fiat 500's tailgate
Fiat 500 (2007-2024 / 312) When the wiring of the Fiat 500 tailgate breaks, the cause is definitely due to its aging and continuous use. To replace it, we must remove the tailg…
How to Replace the Rear Light Bulb of the Fiat 500?
How to Replace the Rear Light Bulb of the Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the rear light bulb of the Fiat 500, open the rear hatch of the car to access the screws securing the light unit: by loosening these screw…
How to Replace the Clutch Switch on a Fiat 500
How to Replace the Clutch Switch on a Fiat 500
Fiat 500 (2007-2024 / 312) In this short video tutorial, you will see the main instructions for removing and replacing the clutch pedal switch on a Fiat 500. First, get into th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos