Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Adjust the Handbrake Cable on the Fiat Punto MK1 - MK2

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

In this short guide, you will discover the procedure to adjust and fix the handbrake cable, allowing the lever to have the correct travel and secure the vehicle on the Fiat Punto first and second series. First, get inside the vehicle and remove the centre console; to do this, remove the plastic cover at the rear and unscrew the screw located underneath, as shown in the video.

At this point, you can pull and then tighten your adjuster to tension the cable!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Fiat Punto?
How to Adjust the Handbrake on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To adjust the handbrake on the Fiat Punto, you need to tighten the bolts located at the ends of the cables. To perform this operation, you will need …
Removing the Handbrake on Fiat Punto
Removing the Handbrake on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see how to remove the handbrake along with the wiring on a Fiat Punto. Start by removing the wheel, taking out its b…
Handbrake Adjustment on Fiat Grande Punto
Handbrake Adjustment on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To adjust the handbrake on your car, there are usually two bolts located behind it, hidden by a protective plastic cover, which you can use to set th…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos