Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Regulator Module on a Fiat Punto MK2

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

In this tutorial video, see how to remove the window regulator module on the second generation Fiat Punto, following the instructions below. First, open the front door and start by removing the door panel; once removed, take off the inner trim as shown in the video.

Now, unscrew all the nuts of the window regulator mechanism using a socket spanner; then disconnect the wiring and remove the mechanism; finally, replace it with the new one, following the tutorial video to the end!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Removing and Installing the Window Regulator Module on a Fiat Grande Punto
Removing and Installing the Window Regulator Module on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial video, see how to remove and replace the front window regulator module on a Fiat Grande Punto in simple steps. First, remove the …
Removing the Front Window Regulator Motor on Fiat Punto
Removing the Front Window Regulator Motor on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to remove the front window regulator motor from a Fiat Punto. First, open the car door and remove the door…
Remove the Window Regulator Motor on a Fiat Grande Punto
Remove the Window Regulator Motor on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to remove the window regulator motor from the rear door on a Fiat Grande Punto? First, use a plastic lever to remove the door trim pieces…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos