Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
MK 3, 319
- Years 2012-2023 In order to remove the radio from the Fiat Panda, you must use the special keys that are supplied when purchasing the car. The key must be inserted in the hole above the buttons numbered 1 to 6. By inserting the key in this hole, the radio mask will come out and it will be possible to extract the entire device from its drawer by pulling it. Once the radio has been removed, the connectors connected to the rear must be disconnected and the car radio replaced. This must be connected and inserted inside the appropriate housing.
Posted on 9 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |