Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Interior Handle on a Fiat Multipla?

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Handle

To replace the interior handle on a Fiat Multipla, detach the two rivets securing the panel where the handle is located. Once the rivets are removed, you can take off the speaker cover and loosen the screws underneath to remove it. Next, lift the window switch panel and disconnect the connectors from underneath. By loosening the screws located beneath the rivets and those under the interior handle, you can detach both the panel and the handle.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Multipla (1998-2010 / MK 1) In this tutorial video, you will see the main instructions on how to remove the door handle of a Fiat Multipla. First, open the door and remove the i…
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
Fiat Multipla (1998-2010 / MK 1) Removing the cover panel of the Fiat Multipla? Start by removing the internal handle and the panel. Use a screwdriver to unscrew the securing pins in…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos