Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Handle on a Fiat Multipla

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Handle

Video tutorial

Open the door in question and remove the caps on the internal armrest part of the door. Next, remove the bolts located inside.

Now remove the two bolts found under the handle, and also remove the speaker cover using a lever. Unscrew the bolts holding it and take it out. This way, you can remove the door panel using a lever between the panel and the door.

Now remove the cap located behind the external handle and unscrew the bolt inside. You can now extract the handle.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the External Door Handle of a Fiat Multipla
Instructions for Removing the External Door Handle of a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) In this tutorial video, you will see the main instructions on how to remove the door handle of a Fiat Multipla. First, open the door and remove the i…
How to Replace the Interior Handle on a Fiat Multipla?
How to Replace the Interior Handle on a Fiat Multipla?
Fiat Multipla (1998-2010 / MK 1) To replace the interior handle on a Fiat Multipla, detach the two rivets securing the panel where the handle is located. Once the rivets are removed,…
How to Remove the Door Panel on a Fiat Multipla
How to Remove the Door Panel on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Removing the cover panel of the Fiat Multipla? Start by removing the internal handle and the panel. Use a screwdriver to unscrew the securing pins in…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos