Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the External Door Handle of a Fiat Multipla

Model: Fiat Multipla MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Handle

Video tutorial

In this tutorial video, you will see the main instructions on how to remove the door handle of a Fiat Multipla. First, open the door and remove the inner panel by unscrewing all the securing screws with a screwdriver; once removed, take off the inner plastic to access the screw of the handle located at the back.

Next, remove the side plastic cap of the door and unscrew the screw inside the hole: all that's left is to pull the handle out from the outside, as illustrated in the tutorial video!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a Fiat Multipla
How to Remove the Battery from a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…
Replacing the timing belt on a Fiat Multipla
Replacing the timing belt on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Below are the main instructions on how to remove and replace the timing belt on a Fiat Multipla. First, open the engine cover of the vehicle and begi…
How to Replace the Door Panel on a Fiat Multipla
How to Replace the Door Panel on a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) How do you remove the door panel (driver's side) on a Fiat Multipla? Before starting the disassembly, disconnect the battery terminals located in the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos