Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Multipla
    4. : How to replace the door panel on a Fiat Multipla

Fiat Multipla - Video tutorial

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Door panel
Operation: How to replace the door panel on a Fiat Multipla

How to remove the door panel (driver's side) from the door on a Fiat Multipla? Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment (if we disconnect the electrical terminals). With a screwdriver we go to unscrew the locking pins in the handle placed on the door panel, unscrew the pins placed in the plastic of the door opening lever. We remove the handle from the door panel, then, with a lever we detach the upper panel. We work (as in the video) to remove the paint from the door panel, then re-upholster the same. Let's reassemble everything by proceeding backwards.


Posted on 5 November 2023 by ScegliAuto



How to remove the Fiat Multipla door panel
Fiat Multipla (1998-2010 / MK 1) Remove the Fiat Multipla cover panel? Let's see the disassembly of the internal handle and the panel. We unscrew the locking pins in the fixed handle
Fiat Multipla external door handle removal instructions
Fiat Multipla (1998-2010 / MK 1) In this video tutorial we will see the main instructions on how to remove the door handle of a Fiat Multipla. First of all we open the door and we go
Where is it and how to reach the cigarette lighter fuse of a Fiat Multipla?
Fiat Multipla (1998-2010 / MK 1) The cigarette lighter fuse of our Fiat Multipla is located inside the fuse box. In turn, the fuse box is located inside the upper left side of the da

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos