Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2021
Part: Battery

To replace the battery of the Fiat 500, open the bonnet to access the engine bay; the battery will be located in the centre and must be removed by disconnecting the terminals and loosening the bolts that secure the retaining brackets. Once the battery is free, you can lift it out and replace it with a new spare part. The new battery must be connected to the terminals and secured by reinstalling the bolts on its brackets. After installation, you can close the bonnet and check the proper functioning of the car.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the remote battery is a simple and quick task for any car remote. The most commonly used battery model is the CR 2032, available online or …
How to replace the battery of the Fiat 500 remote control
How to replace the battery of the Fiat 500 remote control
Fiat 500 (2012-2023 / 500 L) When the remote control of a vehicle stops working, the main cause is the battery inside it being discharged. In order to replace it, we need to open…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos