Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Remove rear bumper on Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Rear bumper
Operation: Remove rear bumper on Fiat Punto

Is the bumper of our Punto broken? Let's remove the rear bumper and replace it with a new one. Lift the tailgate and unscrew the locking pins located in the upper part of the bumper: remove the locking screws. We unscrew the screws placed in the lower part of the bumper, then, we remove the screws placed on the sides of the car's stone guards (under the fender). Once the bumper is free from any screws: take it with your hands and pull it away from the rear body (disconnect any power cables placed behind it). We replace the damaged bumper with a new one.


Posted on 15 March 2024 by ScegliAuto

This video is currently unavailable


Disassembly of the rear bumper Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video we will see how to remove the rear bumper of the Fiat Grande Punto. First we will have to lift the car as we will have to remove the re
How to remove the rear bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) How to remove the rear bumper of a Fiat Grande Punto. Let's see together how to proceed. Operation not too complex if you proceed in order. First of
How to mount the front bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) How to mount the front bumper on Fiat Grande Punto? Let's see how to proceed, an operation not too complex if you proceed in order. First of all we t

    Frequently Asked Questions

    • Punto 2005-2018 - How much does it cost to replace the rear bumper on my Fiat Punto? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos