Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Clock

To set the time on a Fiat Panda, turn the key to switch on the instrument panel and press the SET button located on the central control panel. The word "Menu" will appear on the instrument panel, and you will need to navigate within it using the directional arrows next to the SET button. Select the "Set Time" option and adjust the hours using the directional buttons, confirming with SET; the same operation must be performed to adjust the minutes. After the time has been set, you can exit the menu and turn off the instrument panel.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Fiat Panda?
How do you set the clock on the Fiat Panda?
Fiat Panda (2012-2023 / ) To adjust the clock of the Fiat Panda, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once it is…
How do you set the clock on the Fiat Panda?
How do you set the clock on the Fiat Panda?
Fiat Panda (2012-2023 / ) In order to adjust the clock that appears on the instrument panel of the Fiat Panda, you will need to turn it on by inserting the ignition key into t…
How to Set the Clock on a Fiat Panda?
How to Set the Clock on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To set the clock on a Fiat Panda, turn the ignition key in the ignition switch to power up the instrument cluster. Then, access the relevant menu by …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - How to set the time in the Fiat Panda? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos