Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on a Fiat 500L

Model: Fiat 500 500 X - Years 2014-2022
Part: Light bulb

Start by placing the car on two ramps to gain easier access to the fog lights. Then, unscrew and remove the two screws that secure the lower cover, allowing you to move it enough to reach the fog light with your hand. This will give you access to the bulb cover, which you need to remove. After removing this cover, disconnect the connector attached to the bulb, and then remove the bulb itself. Once this step is completed, you will have successfully removed the burnt bulb. To fit the new bulb, simply follow the steps in reverse, and you will be finished.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change All the Lights on a Fiat 500L
How to Change All the Lights on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Replacing the bulbs on the Fiat 500L is very simple; open the bonnet and look inside, remove the cap of the dipped beam. The bulb inside is a push-fi…
Replacing the Front Headlight Bulb on the Fiat 500L
Replacing the Front Headlight Bulb on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will learn how to remove and replace the front headlight bulb on the Fiat 500L, following the instructions below. First, …
How to Replace the Front Headlamp Bulb of the Fiat 500L?
How to Replace the Front Headlamp Bulb of the Fiat 500L?
Fiat 500 (2012-2023 / 500 L) To replace the front headlamp bulb of the Fiat 500L, open the bonnet and access the back of the headlamp to remove the circular cover. Once this is r…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos