Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel from a Fiat Ducato

Model: Fiat Ducato - Years: 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

In today's video, you will learn how to remove the door panel on a second series Fiat Ducato by following these steps. Open the front door and first unscrew the securing screws found on the panel; then remove the first piece that includes the window switch by disconnecting its electrical connector.

At this point, remove the speaker grille and then the speaker itself by unscrewing the screws and disconnecting the electrical connector; finally, remove all the other screws from the panel to extract it, as shown in the video.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Fiat Ducato
Removing the Front Door Panel of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) This brief guide will provide instructions for removing the front door panel of the Fiat Ducato. First, open the front door of the vehicle and start …
How to Replace the Door Lock on a Fiat Ducato
How to Replace the Door Lock on a Fiat Ducato
Fiat Ducato (2002-2006 / ) To replace the door lock on a Fiat Ducato, remove the door panel. Use a prying tool to detach the panel and disconnect it from the connectors. Once t…
How to Repair the Sliding Door of a Fiat Ducato?
How to Repair the Sliding Door of a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To repair the sliding door of the Fiat Ducato, first remove the inner door panel: this should simply be pried off using a screwdriver. Once the panel…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos