Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Fiat Tipo

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

Start by removing the cover behind the internal door handle using a small flathead screwdriver to pry it off. This will reveal a screw, which you need to unscrew and remove. Next, unscrew and remove the screws located beneath the door handle.

Once these two screws are removed, proceed to unscrew the screws at the bottom of the panel. At this point, you can unclip the internal clips securing the panel by using a thin but sturdy tool to pry along the perimeter.

When this step is complete, the door will detach from its housing. To remove it completely, simply disconnect the connector, and you will have successfully completed the disassembly.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Fiat Tipo
How to Remove the Front Door Panel of a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Before you can start, open the front door of your Fiat Tipo. Begin by unclipping and removing the inserts from the door panel, then remove the covers…
How to Remove the Door Panel on a Fiat Tipo
How to Remove the Door Panel on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) If you need to replace the door lock on your vehicle and therefore need to remove the door panel, you can find useful instructions in this descriptio…
How to Remove the Door Panel of the Fiat Tipo?
How to Remove the Door Panel of the Fiat Tipo?
Fiat Tipo (2016-2026 / 358, 356, 357) To remove the door panel of the Fiat Tipo, use a tool to pry off the covers of the screws that secure the panel to its housing: these covers are loca…

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How is the door panel removed in the 2017 Fiat Tipo? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos