Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Tipo
    4. : How do you remove the door panel of the Fiat Tipo?

Fiat Tipo - Video tutorial

Model: Fiat Tipo 357, 356, 358 - Years 2016-2023
Part: Door panel
Operation: How do you remove the door panel of the Fiat Tipo?

In order to remove the door panel of the Fiat Tipo, you need to lever it with an object so that the screw covers that secure the panel to its housing can be removed. These screw covers are located on the side halfway up the panel, in the seat of the internal handle, and in the lower central part of the panel. Once the screws under these covers have been loosened, it will be possible to detach the panel, disconnecting the underlying connectors and inserting the new replacement piece; this should be secured with the appropriate screws previously removed.


Posted on 22 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Fiat Tipo 2016-2023 - How is the door panel removed in the 2017 Fiat Tipo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos