Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Light Switch on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010

Before you begin, sit in the driver's seat. Start by removing the steering wheel and the lower cover of the steering column by unscrewing the screws and bolts that secure them. Once this step is complete, unscrew the screws securing the upper cover of the steering column, then remove the cover itself. After removing the upper cover, you can pull the light switch block from the column. Before fully removing it, disconnect the connector. Once done, the disassembly is complete. To install the new light switch and close everything up, follow these steps in reverse, and you will have successfully completed the replacement.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Fiat Seicento (1998-2010 / MK 1) In this video, see how to remove the interior light of a Fiat 600. Use a screwdriver to pry between the light and the roof panel (without breaking an…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos