Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light of a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Interior dome light bulb

In this video, see how to remove the interior light of a Fiat 600. Use a screwdriver to pry between the light and the roof panel (without breaking anything), then pull it out from the panel. Disconnect the power connector and detach the plastic cover of the bulb. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing with the clips (push the plastic of the light with your hands until the tabs are fully locked). Test the correct operation of the interior light.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Remove the Wiper on a Fiat 600
How to Remove the Wiper on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Is your wiper not working anymore? Follow these steps to remove it on a Fiat 600: Lift the rear hatch and secure it. Using a socket wrench, unscrew t…
How to Change the Rear Shock Absorber on a Fiat 600
How to Change the Rear Shock Absorber on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Removing the rear shock absorber from a Fiat 600? Let’s see how to disassemble the part. Lift the car on a column ramp and identify the shock absorbe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos