Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. : 127

How to Remove the Starter Motor from a Fiat 127

Model: Fiat 127 MK 1 - Years: 1971, 1972, 1973, 1974, 1975, 1976, 1977
Part: Starter motor

Video tutorial

Before you begin, open the bonnet of your Fiat 127. Start by disconnecting the battery terminals to work safely. Next, disconnect the electrical connector that powers the starter motor.

Once done, unscrew and remove the bolts securing the starter motor to its housing. This will free the starter motor itself.

At this point, extract the starter motor from the engine bay. After completing this step, you will have successfully removed the starter motor.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Fiat Punto 1.2
How to Replace the Starter Motor on a Fiat Punto 1.2
Fiat Punto (1999-2011 / MK 2, 188) Today, discover the guide and steps to remove and replace the starter motor on a Fiat Punto 1.2. First, open the bonnet of the vehicle and begin by r…
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Fiat Linea (2007-2018 / MK 1) In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's ope…
Replacement of the starter motor of the Fiat Panda
Replacement of the starter motor of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the procedure on how to disassemble and replace the starter motor of the Fiat Panda, in simple steps. First, we open the hood of th…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos