Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Starter motor

See other generations:
Video tutorial

Below we will see the procedure on how to disassemble and replace the starter motor of the Fiat Panda, in simple steps. First, we open the hood of the car and start disassembling and removing the battery and battery holder, disconnecting the terminals and unscrewing the fixing screws; then we unscrew the fixing screws of the starter motor, lifting the car to access it, also disconnecting its electrical wiring.

Now we remove and replace the starter motor with the new one (or repair it if possible), finally reassembling the battery.


Posted on 6 September 2025 by ScegliAuto


Related tutorials

Replacing the Starter Motor on a Fiat Panda
Replacing the Starter Motor on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) This guide shows you how to remove and replace the starter motor on a Fiat Panda, following these simple steps. First, lift the vehicle and locate th…
How to Remove the Starter Motor on a Fiat Panda
How to Remove the Starter Motor on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Learn how to remove the starter motor on a Fiat Panda. After lifting the front bonnet and securing it, disconnect the power terminals of the starter …
How to Replace the Starter Motor on a Fiat Panda?
How to Replace the Starter Motor on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the starter motor on a Fiat Panda, open the bonnet to access the components in the engine bay. First, loosen the bolts securing the batter…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos