Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Starter motor

To replace the starter motor on a Fiat Panda, open the bonnet to access the components in the engine bay. First, loosen the bolts securing the battery in its housing, remove the battery, and access the components underneath. You will then locate the starter motor, which is situated to the right of the engine block. Loosen the bolts securing it to its supports and disconnect the power cables. You can then remove it from its housing and replace it with a new one.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on a Fiat Panda
How to Remove the Starter Motor on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Learn how to remove the starter motor on a Fiat Panda. After lifting the front bonnet and securing it, disconnect the power terminals of the starter …
How to Replace the Starter Motor of the Fiat Panda 750
How to Replace the Starter Motor of the Fiat Panda 750
Fiat Panda (1980-2003 / 141, MK 1) This short video tutorial explains how to remove and replace the starter motor of the Fiat Panda 750. The first step is to remove the filter cover; t…
How to Replace the Starter Motor in a Fiat Panda?
How to Replace the Starter Motor in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will see how to replace the starter motor in a Fiat Panda, a simple operation but one that requires good manual skills. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos