Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the starter motor in the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Starter motor
Operation: How to replace the starter motor in the Fiat Panda?

In this tutorial we can see how to replace the starter motor in the Fiat Panda, a simple operation which still requires good manual skills. First of all we wait for the engine to be completely cold, then we disassemble both the battery and the entire filter box. We continue by removing the control unit and the battery base, then we identify the starter motor located in the lower left area of the engine. To disassemble it, it will be sufficient to unscrew the two single fixing bolts with a long 13mm socket wrench. Once separated from the engine and disconnected two terminals, we will be able to assemble the spare part following the reverse procedure.


Posted on 5 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - What problems could the starter motor of the Fiat Panda have? Read Answer
    • Panda 2012-2023 - How much does it cost to replace the Fiat Panda starter motor? Read Answer
    • Panda 2012-2021 - Where is the starter motor located on Fiat Panda mk3? Read Answer
    • Panda 2012-2021 - Where is the starter motor of the Fiat Panda located? Read Answer
    • Panda 2012-2021 - Why does the start and stop of the Fiat Panda not work? Read Answer
    • Panda 2003-2012 - How much does it cost to replace the starter motor on the Fiat Panda? Read Answer
    • Panda 1980-2003 - Where is the starter motor of the Fiat Panda 4x4 1100? Read Answer
    • Panda 2012-2023 - How long does it take to replace the starter motor of a Fiat Panda? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos