Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor of the Fiat Panda 750

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Starter motor

This short video tutorial explains how to remove and replace the starter motor of the Fiat Panda 750. The first step is to remove the filter cover; to do this, unscrew the four screws. Using a 13 mm spanner, remove the bolts securing the starter motor and pull it out, but first disconnect the two terminals. It is very important to disconnect the battery power before performing this step. Now you can replace the starter motor with a new one. If, like the person in the video, you cannot find the starter motor for the Panda 750 but have one from another Panda, you can still use it, but you will need to remove the cap from the old motor and fit it onto the new one. After completing this optional step, you can install the new starter motor by reversing the previous steps.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the starter motor of the Fiat Panda
Replacement of the starter motor of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the procedure on how to disassemble and replace the starter motor of the Fiat Panda, in simple steps. First, we open the hood of th…
Replacement of the starter motor of the Fiat Panda
Replacement of the starter motor of the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Today's instructions will show us how to disassemble and replace the starter motor of the Fiat Panda, following these simple steps. First, lift the v…
How to Remove the Starter Motor on a Fiat Panda
How to Remove the Starter Motor on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Learn how to remove the starter motor on a Fiat Panda. After lifting the front bonnet and securing it, disconnect the power terminals of the starter …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos