Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the starter motor of the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Starter motor

See other generations:
Video tutorial

Various causes lead to the malfunction of the starter motor of a car, for example that of the Fiat Panda visible in this video, such as gear blockage, worn brushes or armature, etc., so the only solution is to disassemble it and proceed with its repair or replacement.

It is found installed near the gearbox, so this is where we will need to intervene, preferably after disconnecting the power cables of the car battery, unscrewing the fixing bolts of the starter motor and disconnecting the electrical cables that power it. From this point on, the work will be mostly done on the workbench, revising it if necessary, before reassembling it.


Posted on 24 May 2025 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Fiat Panda?
How to Replace the Starter Motor on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the starter motor on a Fiat Panda, open the bonnet to access the components in the engine bay. First, loosen the bolts securing the batter…
How to Replace the Starter Motor in a Fiat Panda?
How to Replace the Starter Motor in a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will see how to replace the starter motor in a Fiat Panda, a simple operation but one that requires good manual skills. First, …
Replacing the Starter Motor on a Fiat Panda
Replacing the Starter Motor on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) This guide shows you how to remove and replace the starter motor on a Fiat Panda, following these simple steps. First, lift the vehicle and locate th…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos