Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Fiat Bravo 198 MK2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to remove the original radio from the Fiat Bravo 198, second generation, by following the instructions below. First, get inside the car and start by removing the radio, inserting the appropriate tools into the slots and pushing; once removed from its housing, disconnect the electrical connector and the antenna cable located at the back, as shown in the video.

At this point, you can, if necessary, replace it with a new one, applying the reverse procedure for reassembly!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the radio from the dashboard of a Fiat Bravo? Let's look at the disassembly of the parts. Use the original or aftermarket metal key…
How to Remove and Reinstall the Radio in a Fiat Bravo
How to Remove and Reinstall the Radio in a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will see the steps to remove and reinstall the standard radio in a Fiat Bravo, following these simple instructions. First, g…
How to Remove the Original Radio from a Fiat Bravo
How to Remove the Original Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the original radio from a Fiat Bravo? Follow these steps carefully to carry out the removal. Obtain the original or aftermarket met…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos