Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front and Rear Seats of the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Seat

See other generations:
Video tutorial

In this guide, learn the procedure to remove the front and rear seats of the Fiat Panda. First, open all the doors and start by removing the rear bench seat; to do this, unscrew the bolts found underneath it, then lift and remove the bench, as shown in the video.

At this point, unscrew the bolts found on the runners of the front seats, moving the seat back and forth; disconnect the electrical connector underneath to remove it completely from the vehicle, following the video to the end!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Removing Front and Rear Seats on a Fiat Panda MK1
Removing Front and Rear Seats on a Fiat Panda MK1
Fiat Panda (1980-2003 / MK 1, 141) In this video, we will see how to remove the front and rear seats on a first-generation Fiat Panda 4x4, following the instructions below. First, open…
How to Remove the Rear Seats from the Fiat Panda 169
How to Remove the Rear Seats from the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, see how to remove the rear seats from the Fiat Panda 169, second series, in simple steps. First, open the rear doors and s…
Removing the Front Seats on a Fiat Panda 169
Removing the Front Seats on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see the main steps that will allow you to remove the front seats from a Fiat Panda 169. First, open the front doors and start by unsc…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos