Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Talento?

Model: Fiat Talento MK 1 - Years 2016-2021
Part: Service warning light

To reset the Service light on the Fiat Talento, turn on the instrument panel and navigate through the menu until you reach the "Trip" option. Here, press and hold the call answer button and the OK button for a few seconds. The next options to select will be "Assyst Plus" and then "Full Service". Once this option is selected, confirm with the OK button. After confirming the operation, the reset of the light will be complete. To verify, turn off and then turn on the instrument panel, checking that the light is off.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2019 Fiat Talento?
How to Reset the Service Light on a 2019 Fiat Talento?
Fiat Talento (2016-2021 / MK 1) When you notice the Service light illuminated on the instrument panel of your Fiat Talento, you are nearing the service interval for routine maintena…
How do you reset the Service light of the Fiat Talento?
How do you reset the Service light of the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To reset the Service light of the Fiat Talento, you will need to turn on the instrument panel, so that you can navigate within the menu that will be …
How do you reset the AdBlue warning light in the Fiat Talento?
How do you reset the AdBlue warning light in the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) The Fiat Talento is a commercial vehicle, mainly used for transporting goods. Like all modern diesel engines, this vehicle also requires the use of t…

    Frequently Asked Questions

    • Talento 2016-2021 - How do you reset the service warning light on the Fiat Talento? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos