Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the Fiat Panda bonnet lock

Model: Fiat Panda MK 1, 141 - Years 1980-2003
Part: Body

Let's see in this guide the steps on how to adjust the Fiat Panda's bonnet lock. First we open the bonnet, pulling the lever from the inside, and we use a star or socket wrench to unscrew the nuts of the bonnet lock, as shown in the video. At this point we are going to carry out the alignment of the lock, so that the coupling of the engine hood fits perfectly with our lock; then we tighten the nuts with the same wrench and check the correct closing of the bonnet!

Posted on 19 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to adjust and clean the Fiat Panda washer nozzles
How to adjust and clean the Fiat Panda washer nozzles
Fiat Panda (2003-2012 / MK 2, 169) We will see below the instructions which will allow us to adjust and clean the windshield washer nozzles of the Fiat Panda, in simple steps. First we…
Replacement of the door lock of the Fiat Panda 169
Replacement of the door lock of the Fiat Panda 169
Fiat Panda (2003-2012 / MK 2, 169) Let's find out the procedure needed to remove and replace the cylinder of the front door lock of the Fiat Panda 169, second series. First we open the…
How to replace the lock on a Fiat Panda
How to replace the lock on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) The video is based on the lock of an Autobianchi Y10, but the lock is identical to that of a Fiat Panda being sisters. Let's start by removing the cy…

How to Replace the Front Headlamp Bulbs on a Dacia Sandero

Open the bonnet by pulling the lever located at the bottom left of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlamp (at the rear of the headlamp) and remove it. After removing the caps, you will find the bulbs with metal clips; pull out the bulb holder from the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holder back into the headlamp housing. Reassemble all previously removed parts.

Watch the video!


by ScegliAuto

More videos