Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

In today's video, you will learn how to remove and replace the cabin air filter on the Fiat Panda in simple and quick steps. First, get inside the vehicle and start by unscrewing the screw found on the side plastic of the cabin, located at the bottom; then unscrew the screws of the pollen filter cover to extract it later, as shown in the video.

At this point, replace the air filter with the new one of the correct type; insert it in the correct orientation (usually indicated by arrows printed on the filter) and refit the plastic cover!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Replace the Cabin Air Filter of a Fiat Panda
How to Replace the Cabin Air Filter of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, sit in the front passenger seat of your Fiat Panda. Start by unscrewing and removing the screw that secures the lower side cover of…
How to Replace the Cabin Air Filter of a Fiat Panda
How to Replace the Cabin Air Filter of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the front passenger seat of your Fiat Panda. Begin by unscrewing and removing the screw that secures the lower side cove…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos