Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel on a Fiat Doblo

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Steering wheel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the steering wheel on a Fiat Doblo, a very simple operation. First, you need to remove the airbag, but to do this, disconnect the battery to avoid accidental activation.

To remove the airbag, insert a long screwdriver into the two holes on either side of the steering column cover until you unlock the internal clips. Once released, disconnect the rear power connector and undo the large central bolt using a 24mm socket.

To fit the replacement, simply follow the reverse procedure.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to dismantle the front cover of the steering wheel of the Fiat Doblo
How to dismantle the front cover of the steering wheel of the Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) If you need to remove the front plastic cover of the steering wheel of your Fiat Doblo in order to access the airbag system or to perform a general m…
How to Remove the Steering Wheel on the Fiat Doblò
How to Remove the Steering Wheel on the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this guide, learn the procedure to remove and replace the steering wheel and its airbag on the Fiat Doblò in simple steps. First, get in the vehic…
Guide to Removing the Steering Wheel of the Fiat Doblò
Guide to Removing the Steering Wheel of the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this guide, you will see the main steps on how to remove and replace the steering wheel of the Fiat Doblò. First, get inside the vehicle and remov…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos