Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fascia on the Fiat Ducato 250

Model: Fiat Ducato X290 - Years 2014-2026
Part: Trim cover

On the Fiat Ducato 250, you can replace the fascia of the radio compartment in preparation for installing a radio (2DIN). A fitting kit for installing a multimedia system complete with hardware, brackets, electrical cables, and antenna connections can be purchased. Specifically, proceed as follows: access the driver's seat and remove the two slides of the radio located on the dashboard (centre console). Next, take the new fascia and position it in the housing, applying pressure with your fingers to secure it.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Ducato 250?
How do you reset the Service light on the Fiat Ducato 250?
Fiat Ducato (2006-2014 / X250) The simple way to reset the Service light in the Fiat Ducato 250 is as follows: turn on the instrument panel, press the accelerator pedal, simultaneo…
How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
Removing Fuses on Fiat Ducato
Removing Fuses on Fiat Ducato
Fiat Ducato (2006-2014 / X250) Let’s look at removing the fuses on a Fiat Ducato and where to find them. Open the driver’s side door and locate the cover in the dashboard where the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos