Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Fuel Inertia Switch on the Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014

Discover in this guide where and how to find the fuel inertia switch on the Fiat Ducato, so you can disable it. First, get inside the vehicle and start by removing the plastic panel located under the glove compartment by unscrewing the screws; then you will find the inertia switch for the fuel cut-off underneath, which you will disconnect, as shown in the video. At this point, perform the emergency start of the vehicle using the hazard lights, following the video tutorial until the end!

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Inertia Switch in a Fiat Ducato Van?
Where is the Inertia Switch in a Fiat Ducato Van?
Fiat Ducato (2014-2026 / X290) This video shows where the inertia switch is located in a Fiat Ducato van. This device interrupts the fuel supply to the engine in the event of an ac…
How to reset the fuel inertia switch on the Fiat Ducato
How to reset the fuel inertia switch on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video we can see how to restart the fuel inertia switch on a Fiat Ducato. The YouTuber experienced that after a rather abrupt maneuver, the e…
How to Change the Reverse Light Switch in a Fiat Ducato Camper
How to Change the Reverse Light Switch in a Fiat Ducato Camper
Fiat Ducato (2002-2006 / ) This video tutorial explains how to change the reverse light switch in a Fiat Ducato camper if it fails. Sometimes, the wire on the connector located…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos