Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Inertia Switch in a Fiat Ducato Van?

Model: Fiat Ducato X290 - Years 2014-2026
Part: Checks and maintenance

This video shows where the inertia switch is located in a Fiat Ducato van. This device interrupts the fuel supply to the engine in the event of an accident, which can only be manually reset after a thorough inspection of the various systems. As shown, the switch is positioned inside the cabin, specifically in the lower left area of the dashboard, on the passenger side. To reset the fuel supply, simply press it until you hear a click, ensuring the ignition is off.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Fuel Inertia Switch on the Fiat Ducato
How to Disable the Fuel Inertia Switch on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Discover in this guide where and how to find the fuel inertia switch on the Fiat Ducato, so you can disable it. First, get inside the vehicle and sta…
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) The spare wheel on your Fiat Ducato is located underneath the rear. Before you can start removing it, slightly lift the rear of the van. Begin by loo…
Where is the starter motor located in the Fiat Ducato van?
Where is the starter motor located in the Fiat Ducato van?
Fiat Ducato (2006-2014 / X250) In this video we can see where the starter motor is located in the Fiat Ducato van and how to proceed in case we need to replace it, a very simple op…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos